How To Reset Arlo Camera?

Introduction:

Arlo cameras are a great way to keep an eye on your home or business. They’re easy to set up and you can view the footage from anywhere. But what happens when your Arlo camera isn’t working properly? This article will show you how to reset Arlo camera.

If your Arlo camera isn’t working, the first thing you should do is check the batteries. If they’re low, replace them and see if that fixes the problem. If not, you can try resetting the camera. To do this, press and hold the reset button for 10 seconds. The button is located on the back of the camera.

After you’ve reset the camera, it’s important to test it to make sure it’s working properly. Open the app and view the live feed to see if everything is working correctly.

If you’re looking for a way to keep an eye on your home or business, Arlo cameras are a great option. They’re easy to set up and offer a variety of features that can be tailored to your specific needs. Plus, if you ever have any issues with your camera, resetting it is a breeze.

Step 1: Power off your Arlo camera and remove the battery.

If you’re having trouble with your Arlo camera, one of the first things you can try is resetting it. Here’s how:

1. Power off your Arlo camera and remove the battery.
2. Press and hold the reset button for 10 seconds.
3. Reinsert the battery and power on your camera.
4. Wait a few minutes for the camera to reboot and reconnect to the base station.
5. If your problem persists, you can try factory resetting your camera (see Step 2). Arlo base station and camera troubleshooting tips

Tip: If your Arlo cameras are offline or you’re having trouble with the base station, try power cycling them.

1. Unplug the base station’s power adapter from the electrical outlet.
2. Wait a few minutes before plugging it back in.
3. If your problem persists, you can try resetting the base station (see Step 2). Resetting the base station 1. Power down your Arlo camera and remove the battery. 2. Press and hold the Reset button on the back of the base station for 5 seconds. 3. Release the Reset button and replace the battery in your Arlo camera.
4. Power on your Arlo camera. 5. Wait for the connection to re-establish before using your Arlo camera again. Note: You can also reset your base station by pressing and holding the On/Off button on the back of the base station for 10 seconds.

Step 2: Press and hold the reset button for 10 seconds.

If your Arlo camera isn’t working as it should, you can try resetting it to its factory default settings. Here’s how:

1. Locate the reset button on your Arlo camera.
2. Press and hold the reset button for 10 seconds.
3. Release the reset button when you see the LED light on your Arlo camera turn red and then blink white.
4. Your Arlo camera will now be reset to its factory default settings!

Why do I see a red light blinking on my Arlo camera?

If you see a red light blinking on your Arlo camera, it means that your camera is in the process of recording an activity. Why do I see a blue light blinking on my Arlo camera? If you see a blue light blinking on your Arlo camera, it means that your camera is in low battery mode. Why do I see a yellow light blinking on my Arlo camera? If you see a yellow light blinking on your Arlo camera, it means that you are experiencing network connection issues. Why do I see a purple light blinking on my Arlo camera? If you see a purple light blinking on your Arlo camera, it means that your camera is in night vision mode. What should I do if my Arlo system is offline? If your Arlo system ever goes offline, follow this guide to get it back online.

Step 3: Replace the battery and power on your Arlo camera.

If your Arlo camera isn’t working properly, you may need to reset it. Here’s how to do that:

1. Remove the battery from your Arlo camera.
2. Insert a new battery into your Arlo camera.
3. Power on your Arlo camera.
4. Wait for the camera to connect to the base station.
5. Once the connection is established, you should see the status light on the base station turn green.
6. If the status light doesn’t turn green, or if you still can’t access your camera, please contact customer support for further assistance. Why doesn’t the Arlo app work on my iPad? The Arlo app is compatible with iOS 9+ and Android 4.4+. To check your device model, go to Settings > General > About.

Can I use multiple cameras in one location? No. Arlo Pro and Arlo Go cameras can be paired with only one base station. Arlo Q is wireless and does not need a base station. You can add multiple cameras to your Arlo Q account as long as you have an active internet connection.

Can I connect more than one Arlo camera to my base station? You can connect up to five cameras to your existing Arlo Smart Base Station. You can also add additional base stations and cameras if you need additional coverage. How do I use the Ethernet port on the Arlo Pro or Go? You can connect the Ethernet port on Arlo Pro or Arlo Go cameras to your router via an Ethernet cable. It’s perfect for hard-to-wire locations, where Wi-Fi is not available.

Step 4: Wait for the camera to connect to the base station.

If your Arlo camera isn’t connecting to the base station, follow these steps:

1. Check the LED lights on both the base station and camera. If the lights are off, make sure that both devices are plugged into a power outlet.
2. If the lights are on, press and hold the Sync button on the base station for two seconds.
3. Next, press and hold the Sync button on the camera for two seconds. You should see a flashing green light on the camera.
4. Wait for the camera to connect to the base station. The light on the camera will turn solid green when it’s connected.

If you are having trouble connecting your Arlo camera to the base station, there are a few things you can try. First, check to make sure that the base station is properly plugged in and that the lights are lit up. If they are not, unplug the base station and plug it back in. Once the lights are lit up, press and hold the reset button on the back of the base station for 10 seconds. This will reset the base station and hopefully allow your camera to connect. If you are still having trouble, you can try moving your camera closer to the base station or connecting it to a different power outlet. I love the sense of security I get from this. I don’t have an indoor camera, so I can’t speak to how well this works with that type of setup, although it is supposed to be compatible. The mount that comes with the camera is not very good. I just set the camera on a shelf and it has stayed there for over a month so far. It’s also supposed to be compatible with Ring Chime, although I haven’t tried this yet. This camera is awesome! I love being able to look in on my little ones as they sleep. I have also set it up a couple of times to view people entering my home when I am not there. It is very easy for me to check on things from work and be so thankful that I have this service!

Step 5: Access the camera through the Arlo app.

If you’re having trouble connecting to your Arlo camera, follow these instructions to access the camera through the Arlo app.

1. Open the Arlo app on your mobile device.
2. Tap the menu icon in the top left corner of the screen.
3. Select ‘Devices’ from the menu.
4. Tap the ‘+’ icon in the top right corner of the screen.
5. Select ‘Add Device’ from the menu.
6. Enter your camera’s serial number and tap ‘Continue.’
7. Follow the on-screen instructions to complete the setup process. For more information on setting up, refer to the Arlo Q&A: I can’t connect to my camera.

I’m having trouble connecting my Arlo camera and phone. What do I do?

See more questions like this: I’m having trouble connecting my Arlo camera and phone. What do I do?

How can I connect to my camera using the Arlo app?

1. Open the Arlo app on your mobile device.
2. Tap the ‘+’ icon in the top-right corner of the app.
3. Tap ‘Add Device.’
4. Follow the on-screen instructions to complete the setup process.

Conclusion: By following these steps, you will be able to reset your Arlo camera.

If your Arlo camera isn’t working properly, you can try resetting it. Here’s how:

1. Unplug the power adapter from the camera.
2. Remove the battery from the camera.
3. Press and hold the reset button for 10 seconds.
4. Replace the battery in the camera and plug in the power adapter.
5. The camera will now be reset to its factory default settings. If you have questions or need help, contact customer support. To contact support, visit www.arlo.com/support or call 888-282-2854 (888-ARLO-5776).

arlo camera reset

Last modified: December 12, 2022