If your Blink Camera is blinking red, there are a few things you can do to fix the issue. First, check the batteries and make sure they are properly seated. If the batteries are fine, then try resetting the camera. To do this, simply unplug the power cord from the Blink Camera, wait 10 seconds, and then plug it back in. If your Blink Camera is still blinking red after following these steps, please contact customer support for further assistance.
Why is my Blink Camera Blinking Red ?
The red LED next to the Blink Mini display indicates when the live camera feed is not connected to the Internet. To begin, unplug and plug the camera in. If the camera was already plugged into your network, the red LED illuminates solid blue and blinking green lights as it connects to the network again. Once connected, the Mini won’t show lights on the front unless you have the orange recording indicator on. The red light is also shown briefly during the Mini camera setup process, just before the solid green and red light show that the Mini is ready to be added to your system.
If the steady red light on the screen remains, use a thin object like pin or thumb tack to press the reset button shown in the image (this can damage the camera if you use a sharp object instead) and then wait for the appropriate green/blue LED pattern to appear.
If the red light does not change within 120 seconds, please contact support to ensure all updates complete correctly.
How to Fix a Blinking Red Blink Camera: Offer step-by-step instructions on how to fix a blinking red Blink Camera.
Blink Outdoor, Indoor, XT2, and XT
Outdoor/Indoor (gen 2) Camera showing LED on left, and IR emitter on the right
Blink cameras powered by batteries flash a red LED every 3 seconds when linked to the internet, the LED starting flashing 5 long flashes of lightning and then repeating a short flash every 3 seconds, until online. If you do not see 5 long flashes, add a new set of non-rechargeable Lithium batteries. In the Blink app’s main menu, you will get the option to add the flashing camera to Blink by tapping the Add Device icon.
You may also click to access the troubleshooting Wi-Fi connections page if the camera has been used, or end Wi-Fi operations to reset the camera. Another option is to delete the camera and add it to a system again. The recording light becomes either Red 5 or 6 times, followed by the flash signaling battery failure. Ensure you have at least one fresh set of AA 1.5-volt non-rechargeable lithium batteries installed.
Conclusion:
xt2-reset-button
When your Blink camera starts blinking red, it can be frustrating. But don’t worry, there are a few things you can try to fix the issue.
First, check to make sure that the batteries are properly installed and charged. If they are, then try resetting the Blink camera by pressing and holding the reset button for 10 seconds.
If neither of those solutions work, then you may need to factory reset your Blink camera. To do this, press and hold the reset button for 20 seconds. Keep in mind that this will delete all of your saved settings and footage, so be sure to back up anything you want to keep before proceeding.
If you’ve tried all of these things and your Blink camera is still blinking red, then there may be a more serious issue at hand. In that case, you’ll need to contact customer support for further assistance.
Last modified: November 28, 2022
